Pressure Spray Drying Equipment
|Payment Type:||L/C,T/T,Western Union|
|Terms of Trade:||FOB|
|Min. Order:||1 Set/Sets|
|Delivery Time:||50 Days|
|Productivity:||10-20 Set per Year|
|Place of Origin:||China|
|Supply Ability:||3-5 Set/Sets per Month|
Model No.: YPG
Pressure Spray Drying Equipment
1. Pressure Spray Drying Equipment is Rich Fat Milk Powder Dryer
2. Pressure Spray Drying Equipment is Cocoa Milk Powder Dryer
3. Pressure Spray Drying Equipment is Milk Powder Spray Dryer
1. Pressure Spray Drying Equipment Principle:
The solution, emulsion, suspension liquid or slurry are sprayed into fine beads in the hot air, going down from the top of the drying chamber to the bottom, the water will be evaporated to and the product becomes small granular product. Induce hot air from the top of drying tower, at the same time, pump the material liquid to the top of the tower by high pressure pump, the feeding solution becomes fine beads or small droplets through the pressure nozzle(s). When the droplets meet the high temperature hot air, the water will be evaporated immediately, and the material liquid is dried into dry product in a very short time, the product is discharged from the bottom of the drying tower, or from the cyclone (depend on the configuration). When the hot air contacts with the droplets, the temperature declines significantly, and the humidity increases greatly, and then will be exhausted by exhaust fan. The fine powder in the air will be collected through different separating devices There`re different fine powder separation and recovery devices, such as cyclone (the common type and various combination type), bag filter, cyclone + bag filter, cyclone + wet scrubber, and bag filter + wet scrubber etc. We should different fine powder separation and recovery devices as per the characteristics of product and requirements of customer. Depend on the product features and requirements, we might install secondary drying and cooling system (such as ZLG vibration fluid bed or pneumatic transportation), formulation system or powder sieving system etc after the spray dryer, or dehumidifier. The particle size of the product from pressure spray dryer is normally within the range of 120mesh to 20 mesh. If bigger particles are required, we suggest FL Fluidized Granulator or re-combined agglomerator.
2. Pressure Spray Drying Equipment Feature:
The dry speed is fast and suitable for drying thermal sensitivity material particularly.
The finished product is ball granule with uniform size. Its fluidity and solubility are good. The purity of product is high and its quality is good.
It applied scope is wide. According to the characteristics of raw material, it can use hot air to dry and can also use cool air to granulate. It has strong adaptability to raw materials.
Its operation is simple and stable and its control is simple and convenient and is easy to realize automatic operation.
3. Pressure Spray Drying Equipment Application:
It is suitable for liquid of foodstuff, pharmaceutical, chemical industry, dyestuff, ceramics, agrochemicals, plastic and so on
|Pressure(Mpa)||it can be regulated from 0.6to5 in general, it will be from 1to 3|
|Heating way||electricity||electricity+steam||electricity+coal fuel(oil)hot air furnace|
|Diameter of tower body(mm)||1300||1800||2400||2600||2800||3200||3800|
|Total height of equipment(mm)||7800||9200||11600||14000||15300||17100||19000|
From dryer, mixer to granulator, from unit machine to production line, we have them all. Hywell Machinery is a professional manufacturer of industrial drying machine, mixing machine and granulating machine. Our flagship products include the hot air dryer, vibration fluid bed dryer, belt dryer, vacuum dryer, one dimensional mixer, two dimensional mixer, three dimensional mixer, and high speed granulator and so on. These high-performance machines have extensive applications within industries such as food, medicine and chemical. Sustained development and a strong emphasis on research and technology have bolstered our quality standards. we seek to achieve the highest level of customer satisfaction through professionally developed drying ,mixing and granulating solutions. Hywell Machinery constant faith is providing perfect products to customer, excellenting service to customer !
In order to ensure quality of product, we focus on user 's requirements and control improvement and enhancement quality of products .The quality assurance mainly focus on the processes of ensuring production readiness inspection, control of raw materials and components, process control, critical parts, important parts of quality control, assembly quality control, process control testing, measurement equipment control. Pay close attention to the implementation of the quality assurance work, strictly to three inspection system of self-checking, mutual inspection, special inspection. The key point of Quality assurance is focuses on critical parts, important parts of quality control, the quality standards required by ISO9000 quality control procurement documents in order to clarify its status and acceptance of quality standards for company's re-inspections ; For critical parts and important that the key processes of identification and corresponding technical documentation, control by "the implementation of key quality control process", and complete, accurate and complete original records. Difficulties in quality assurance is a special process control, quality assurance is mainly painting, has developed a special process (painting) process documents, take the appropriate technical measures, to quality assurance.
In the production process, we pay close attention to quality control of each process. Every component, every process was strictly controlled. Enhanced the quality inspection process, the establishment of the necessary quality control point, the process by a full-time staff and quality inspector for inspection and supervision. Improved testing procedures and operating instruction.
We Invite customers to visit our company and communicate on technical requirements face to face.
Responsible for debugging the equipment according to customers' requirements of various technical data. Our engineers will train our customers about equipment features and operation key points to make sure the equipment running in the best condition.
We provide installation, debugging, maintenance, training and other services (Optional); Provide relevant technical data, equipment, software and related GMP certification materials;Set up after-sales service hotline, and arrange personnel to visit customers every year to know more customer needs,like customer operation problems in the process of production equipment.
Our company promises strictly operate the ISO9001 quality system certification standards and pharmaceutical equipment GMP audit requirements,promise we provide new equipment. Advanced technology,good quality.Equipment operation safe reliable, affordable, easy to maintain.
Equipment warranty period is one year,all the parts for the equipment choose well-known brand.
During the warranty when equipment have problem in quality like equipment failure and damage, our company offer free maintenance or replacement.
Changzhou Hywell Machinery Co,.Ltd
Hywell is professional manufacturer for drying machine, mixing machine, granulating machine and grinding machine.From dryer, mixer to granulator, from unit machine to production line, we have them all. Hywell is a Chinese supplier of industrial dryer, mixer, granulator. our flagship products include the hot air dryer, microwave dryer, vacuum dryer, one dimensional mixer, two dimensional mixer, three dimensional mixer, and granulator and so on.......
- Company Name: Changzhou Hywell Machinery Co,.Ltd
- Representative: Shally
- Product/Service: Drying Machine , Mixing Machine , Granulating Machine , Grinding Machine , Vibration Sieve , Coating Machine
- Capital (Million US $): US1.5 million
- Year Established: 2009
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 3
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Jianhu Industrial Park,Wujin District
- Contact Person: Mr. Jeff
- Tel: 86-0519-85786231
Premium Related Products