400 X-TL(R) FGD Pump
Basic Info
Model No.: 400X-TL(R)
Product Description
400X-TL(R) Series FGD Pump
• Product Introduction
400X-TL(R) is 400mm size single stage,single suction horizontal centrifugal Slurry Pump.It is mainly used as the slurry circulating pump for absorbent tower in FGD appliances. This horizontal FGD pump has such features:wide rangecapacity,high efficiency,better energy saving.This TL(R) series desulfurization pump is equipped with compact X shaped bracket for significantly saving space.THere are many kinds of materials targeted on the pump for FGD,such as A49.A49 is a kind of new material duplex phase stainless white Iron,which has advantages of anti-corrosion as duplex stainless Steel and anti-abrasion of high chrome alloy.
• Product Feature
- The wear parts are made of replaceable hard alloy liner or Rubber Liner , which has good wear resistance, corrosion resistance and high reliability.
- The structure of the desulfurization pump is back disassembling type for easily maintenance, it is not necessary to dismantle the inlet or outlet pipeline when maintenance is needed.
- The impeller are made from a new type of anti-abrasion and anti-corrosion material specially for FGD process, this type of material has advantages of anti-corrosion as duplex stainless steel and anti-abrasion of high chrome alloy.
- Double-row tapered roller bearing is adopted at the pump end, cylindrical roller bearing is adopted at the drive end, and the bearings are lubricated by oil so that the condition the bearings works under is improved and the service life of the bearings is lengthened.
- Cartridge mechanical seal which is specially adopted in desulfurization process is used to make its operation much stable.
Srtucture 1
NO. | Name | Material |
| NO. | Name | Material |
1 | Suction cover | A49 | 9 | Impeller release collar | Stainless steel | |
2 | Cover plate liner | Natural rubber+A3 | 10 | Shaft sleeve | 316 | |
3 | Impeller | A49 | 11 | Double-row tapered roller bearing |
| |
4 | Frame plate liner | Natural rubber+A3 | 12 | Bearing house | QT500-7 | |
5 | Frame plate | QT500-7 | 13 | cylindrical roller bearing |
| |
6 | Rear liner | Natural rubber+A3 | 14 | Shaft | 45 | |
7 | Adaptor plate | QT500-7 | 15 | Bracket | QT500-7 | |
8 | Mechanical seal | Hard alloy | 16 | Cover plate | QT500-7 |
Note:A49 material is a kind of Duplex phase anti-abrasive and anti-corrosive alloy, it widely used for FGD projects in the word.
Srtucture 2
NO. | Name | Material |
| NO. | Name | Material |
1 | Suction cover | QT500-7+Natural rubber | 9 | Impeller release collar | Stainless steel | |
2 | Throat bushing | A49 | 10 | Shaft sleeve | 316 | |
3 | Impeller | A49 | 11 | Double-row tapered roller bearing |
| |
4 | Volute liner | A49 | 12 | Bearing house | QT500-7 | |
5 | Frame plate | QT500-7 | 13 | cylindrical roller bearing |
| |
6 | Rear liner | A49 | 14 | Shaft | 45 | |
7 | Adaptor plate | QT500-7 | 15 | Bracket | QT500-7 | |
8 | Mechanical seal | Hard alloy | 16 | Cover plate | QT500-7 |
Note:A49 material is a kind of Duplex phase anti-abrasive and anti-corrosive alloy, it widely used for FGD projects in the word.
• Range of Performance
Capacity Q:2500m3/h
Head H:25m
Discharge diameter: 400mm
Contact us if you need more details on 400mm Size FGD Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Desulfurization Process Pump、The Pump For FGD. If these products fail to match your need, please contact us and we would like to provide relevant information.Product Categories : Horizontal Centrifugal Slurry Pump > TL(R) Series Desulfurization Pump (FGD Pump)